User's Manual

13
ROOM AMBIENT TEMPERATURE
To help maintain a comfortable environment,
your Breville AirRounder Plus™ Connect
purifier fan heater is fitted with a temperature
sensor that detects the room temperature
(in °C) which will display on the LED display
screen. The number displayed is only an
indication of the room temperature and will
vary depending on the location of the purifier
fan heater in the room.
NOTE
The room temperature display is an indicative
temperature only based on the temperature
sensor within the purifier fan heater.
Temperatures further away from the unit itself
may be different to this reading.
MEMORY
The purifier fan heater has a memory function
and will return to the last setting it was set to
when it was turned off. This will only occur if
the purifier fan heater is not unplugged and/or
switched off at the power point.
FUNCTIONS
Cooling + Purifying Mode
Your purifier fan heater has 3 cooling fan
settings: LOW, MEDIUM and HIGH.
5. To choose between these cooling fan
settings, press the
button found on the
control panel or
button found on the
remote control, until the desired setting
illuminates on the LED display screen.
The LED display screen will display the
room ambient temperature and current
fan setting.
6. To cancel a cooling setting, press the
button to stop operation.
If the operation is stopped, the unit will enter
standby mode and the LED display screen
will be dimmed and display the ambient room
temperature.
Heating + Purifying Mode
Your purifier fan heater has 3 heat settings:
LOW, MEDIUM and HIGH and allows you to
set your desired temperature.
1. To choose between these heat settings,
press the
button found on the control
panel or press the
button found on the
remote control repeatedly, until the desired
setting illuminates on the control panel
LED lights. The LED display screen will
illuminate the room ambient temperature
and the light ring will illuminate red.
2. To cancel a heat setting, touch/press the
button on the control panel or remote
control to stop operation. If the operation
is stopped, the unit will enter standby mode
and the LED display screen will illuminate
‘OFF’ whilst the unit is cooling down. Once
cooled, the ambient room temperature will
be displayed.
WARNING
To avoid overheating, do not cover the heater.
Set Temp
Take control of your room temperature.
Everyone's comfort levels are different, so you
can set your own preferred temperature or even
heat the room before you go to bed.
1. To set the desired temperature, touch and
hold for 3 seconds the
button found
on the control panel or press and hold
for 3 seconds the
button found on the
remote-control.
2. To increase the temperature tap the
button on the control panel repeatedly
or press the
button repeatedly on the
remote control.
3. To decrease the temperature, tap the
button on the control panel repeatedly
or press the
button repeatedly on the
remote control.
4. Once the temperature has been set, the
LED display screen will illuminate the
room ambient temperature. The purifier
fan heater will maintain the room ambient
temperature to the temperature setting
automatically.