User's Manual

15
To cancel the pre-set auto-off time, once the
timer is set, tap the
button repeatedly
on the control panel or press on the remote
control until the number of hours no longer
illuminates on the control panel LED lights.
NOTE
The timer can be set on all modes and all
modes can be adjusted at any time once the
timer is set.
The purifier fan heater will switch to standby
mode once the set time has elapsed.
OSCILLATION
The purifier fan heater has horizontal
oscillation. The oscillation can be set
on all modes.
To activate oscillation, press the
button
repeatedly on the control panel or press on
the remote control to select between 60, 120
and 360 degrees, until the desired degree of
oscillation displays on the control panel LED
lights. The purifier fan heater will move left to
right continuously.
To stop and direct the orientation of your
purifier fan heater during oscillation, when the
airflow has reached your preferred position,
press the
button repeatedly on the control
panel or press on the remote control until 60,
120 or 360 degrees is no longer illuminating
on the control panel LED lights.
When the purifier fan heater is turned off, the
unit will stop oscillating and return to centre
position. When turned on from standby, the
purifier fan heater will start oscillating at the
same angle as previously set.
If no oscillation angle was set, the unit will stay
at the same position as it was when it stopped.
CHILD LOCK
When the Child Lock is engaged, the buttons
on the control panel are locked from use.
1. To turn on, touch and hold the
button on
the control panel or press and hold the
on the remote control until a beep sounds
and the child lock icon illuminates on the
LED display panel.
2. To cancel, repeat step 1 until the child lock
icon no longer illuminates on the LED
display panel.
FILTER RESET
• The REPLACE FILTER icon will illuminate on
the LED display panel indicating that the
filter needs to be replaced.
• Replace the filter according to the directions
found under Replacing the Filter in this book.
• Once the filter is replaced, press and hold
the
button on the control panel for 10
seconds to reset. The REPLACE FILTER icon
will no longer illuminate on the control
panel display.
• The built-in timer for the filter reset
is 292 days.
NOTE
For best performance, the filter should be
cleaned at least monthly as per the instructions
found in the Care, Cleaning & Storage section
of this book.
REMOTE CONTROL
The purifier fan heater comes with a remote
control. This remote control features the same
controls as the control panel on the purifier fan
heater and can be used the same way.
The control panel has an additional control
not found on the remote control. The FILTER
RESET function can be set using the control
panel only. Refer to the FILTER RESET section
of this book for more details.
To avoid misplacing your remote control, place
the remote control in the remote holder at the
back of the unit (Fig 1).
Fig. 1