User's Manual

16
USING THE REMOTE CONTROL
The remote control includes 1 x CR2032
3V Lithium battery. This Lithium battery is
protected by an isolating slip. Before first
using the remote control, remove the battery
isolating slip by pulling the slip outwards away
from the remote control.
To check and/or to replace the battery, open
up the battery compartment at the back of the
remote by forming a good grip of the remote,
pushing the small arched groove to the right
and simultaneously pushing out the battery
compartment cover by pushing the rectangular
groove outwards. Insert the battery paying
attention to the polarity (+ and -) (Fig 2).
Fig. 2
BACK OF REMOTE
Reinsert the battery compartment into the
remote control ensuring that the + symbol
is facing downwards when inserted. Make
sure the battery compartment is correctly
secured (Fig 3).
360°
Fig. 3
NOTE
To use the remote control, it must be pointed at
the control panel and must be used within five
meters of the unit
WARNING
KEEP BATTERIES OUT OF REACH OF
CHILDREN
Swallowing may lead to serious injury in as
little as 2 hours or death, due to chemical burns
and potential perforation of the oesophagus.
If you suspect your child has swallowed or
inserted a button battery immediately call the
24-hour Poisons Information Centre on 13 11
26 for fast, expert advice. Examine devices
and make sure the battery compartment is
correctly secured, e.g. that the screw or other
mechanical fastener is tightened. Do not use
if compartment is not secure. Dispose of used
button batteries immediately
and safely. Flat batteries can still be dangerous.
Tell others about the risk associated with
button batteries and how to keep their
children safe.