Specifications

60GHzand80GHzProductsNMSManual
14 58000511rev.F
SettingRSLactivationpointvaluestozero:
WhentheRSLActivation pointissettozero,the AdaptPath™or
LSPfunctionwillbecontinuouslyforced.
WhentheRSLDeactivation pointissettozero,thefunctionwill
notreturnafterengagement.
4.5 SynchronousLSPSetup
LinkStatePropagation(LSP)allowsexternalnetworkequipmenttohandleredundancyby
rapidlyswitchingtheapplicationtraffic,synchronouslyatbothendsofthelink, toanother
available(redundant)interfaceintheexternalnetwork.Thisfunctionalitygenerallysupportedon
enterpriseandnetworkbackboneclassswitchesandrouters.
LSPshouldremaindisabledunlessitisnecessarytoquicklysignalexternalnetworkequipment
whenradiolinkdownstatesaredetected.
LSP:
· IsavailableinallradiosfromBridgeWave,AR,GE,FEandFEU.
· Thefunctionalitycanbetestedbyusingabuiltintestfunction.
LSPcanbesetuptoallow:
· AR:GEtoFEandthenLSPbysettingtheRSLleveltothesuggestedFEdefault.
· GE:GEtoLSPbysettingtheRSLleveltothesuggestedGEdefault.
· FE:FEtoLSPbysettingtheRSLleveltothesuggestedFEdefault.
· FlexibilitytosetanyRSLlevelfortheLSPactivation.
InBandmanagementwillbedisconnectedfromFiberwhenLSPisactivated.InBandandOut
BandmanagementwillstillbeavailablefromCopper.