Specifications

60GHzand80GHzProductsNMSManual
16 58000511rev.F
3. SelectAccesscontroltoeither‘InBand(Default)orOutBand(CopperManagement
Only)atbothRadios
4. Pressthe‘SubmitNewValues’buttonatbothradios.
TestingtheLSPfunction(s):
1. Puttestapparatusorcomputersateachendofthelinktopingorruntrafficacrossthe
link
2. IntheHighbandRadio’s‘Maintenance’page,set‘ForceLSP”andsetthedurationofthe
testto199minutes.TheHighbandradioactivatesthefunctionforbothendsofthelink
andthe‘ForceLSP’controlwillnotbeseenontheLowbandradio
3. Pressthe‘SetValue’button
4. ForanAdaptPath™link,observethatthetrafficisstillflowinginthesecondarypath
5. ForaLSPlink,verifythatbothfibertransmittersaredown.
6. Returnthesystemtothe‘ClearLSP’state.(Orwaitforthefunctiontotimeout)
4.6 AccessC ontrol
The‘AccessControl’optionperformstwofunctions.Oneistospecifywhichinterfaceswillbe
allowedaccesstotheinternalmanagementagentforwebandSNMPaccess.Thesecondisto