Specifications

60GHzand80GHzProductsNMSManual
41 58000511rev.F
7.4 Communities
ReadandwritecommunitystringsareusedforpermittingSNMPmanagementaccess.The
Communitystringsarecasesensitiveandcanhave012characterscomprisedofnumbers,
letters,orspecialcharacters.
ReadOnly: UsedforauthenticationofSNMPGETrequest.Defaultvalueis‘public’.
Read/Write: UsedforauthenticationofSNMPSETrequest.Defaultvalueis‘private’.
SNMPAccess: ThisparameterallowsforSNMPtobe‘Disabled’,‘EnabledRead/Write’,
or‘EnabledReadOnly(Default)’.
Aspartofthe initialsetup,ifyoudonotintendtoutilizethe
SNMPf unction,itisgoodpracticetochangethe‘SNMP
Access’to‘Disabled’.Thiswillpreventusersfromaccessing
theSNMPagent.
7.5 Enhance dSecurity
Permitspasswordsecurityconfigurationoptiontoexpirethepasswordintherangeof09999
hours.Ifthevalueissettozero,thepasswordismaintainedindefinitely.
Permitspasswordsecurityconfigurationoptiontosettheminimumpasswordlengthto10
charactersminimum.Disabledallowsanylengthpassword.Themaximumpasswordlength
allowedis16characters.
Permitspasswordsecurityconfigurationoptiontoallowornotallowpasswordreuse.