Specifications

60GHzand80GHzProductsNMSManual
43 58000511rev.F
8 RADIUS
RemoteAuthenticationDialInUserService(RADIUS)standard(RFC2865)allowsforremote
andcentralizeduseradministration,authenticationandauthorizationoftheBridgeWaveRadio
usernamesandpasswordswhentheradiosareembeddedinanetworkenvironment.
WhenRADIUSisenabledintheBridgeWaveradioandauserattemptstologintotheradio,the
radiowillsendtheauthenticationrequesttothespecifiedRADIUSserver.
ThecommunicationbetweentheradioandtheRADIUSserverisauthenticatedandencrypted
throughtheuseofasharedsecret.Thesharedsecretisnottransmittedoverthenetwork.
TheradiohasthreeRADIUSconfigurationoptions:
· Disable(Default)
· Enablewhileallowinglocallyconfigured(admin,user)loginaccess
· Enablewhiledisallowinglocallyconfigured(admin,user)loginaccess
IftheRADIUSserverisnotavailableandRADIUSisenabled
withlocalaccessdisallowed,ahardresetwillbeneededto
regainloginaccesstotheradio.
8.1 ConfiguringRADIUS
TheRADIUSrelatedconfigurationparametersarelocatedintheRADIUStaboftheweb
interface.
UsethefollowingstepstoconfigureRADIUS
1. Selectthe‘RADIUS’tabfromthewebbrowserinterfaceoftheunit.
2. EnterthePrimaryRADIUSserverIPaddressinthefieldprovided.TheSecondaryserver
addressisoptional.
3. Entertheserverportinthefieldprovided
4. Enterthesharedsecretinthefieldprovided
5. Reenterthesharedsecretintheverifyfieldprovided
6. Enterthe‘Timeout’and‘Retries’valuesifotherthandefaultisrequired
7. Selecttheconfigurationmodeof‘Disable(Default)’,‘Enable(allowLocal
Users)’or‘Enable(DisallowLocalUsers)’fromthedropdownmenu
8. Pushthe‘Submit’button