Specifications

60GHzand80GHzProductsNMSManual
56 58000511rev.F
Clickonthe‘AES’tabtorefreshthepageuntilthe
buttonsarenolongergrayedout.Donothitthe
browser‘Refresh’optiontoupdatethepage.Thiswill
causethekeytoresaveandthebuttonswillcontinue
tobegrayedout.
Pleasebepatient.Itmaytakeupto4minutesforthe
256keydatatobewrittentotheradiomemory.The
buttonsontheAE Spagewillbegrayedoutduring
thisprocess.
4. LogintotheRemote(FarEnd)unitandperformthe‘SetKey’operationoutlinedin
Step3.Again,itcantakeupto4minutesforthekeytobewrittentotheflash
memory.
5. Nextselectthe‘ActivateKey’optionontheRemote(FarEnd)unitfirst,andthenthe
Local(NearEnd)unit.Thisappliesthekeytotheinternalencryptionhardwarebut
doesnotenableencryption.
6. The‘Encryption’fieldisusedto‘Enable’or‘Disable’encryptionandissetto
‘Enable’bydefault.VerifythatboththeLocal(NearEnd)andRemote(FarEnd)unit
‘Encryption’fieldsaresetto‘Enable’.If‘Disable’isselected,togglethe‘Encryption’
fieldoftheRemote(Farend)to‘Enable’andthenclickthe‘SetEncryption’button,
thenperformthesameontheLocal(NearEnd)unit.