Specifications

60GHzand80GHzProductsNMSManual
61 58000511rev.F
Makingyourownhardresetcable:
Ifyoudonothaveaccesstothehardresetboxsuppliedwiththeunit,youcancreateyourown
“hardresetcable”usingthefollowingprocedure:
1. ObtainastandardEthernetpatchcableatleast3minlength.
2. CutoffoneendoftheEthernetpatchcableandthenstripthejacketfromthetwowires
thatbelongtopins3and6.Thesearetypicallythewiresfromeithertheorange/white
orangeorgreen/whitegreenpairs,butthisisnotguaranteedtobethecase.
3. Connectthetwowiresfrompins3and6togethertomakeashort.Allotherwiresmust
beleftunterminated.
4. UsethishardresetcableasasubstituteforthehardresetboxandEthernetcable.Instead
ofdisconnectingthehardresetbox(asinthepreviousprocedure),disconnectthewires
goingtopins3and6fromeachotherandleavethecableinplacefortheadditional2
minutes;itisimportantnottoremovethecablefromtheunituntiltheprocessis
complete.