Communications, Inc. Switch User Manual



GE/AR80 Installation Manual

580-00519, rev A 16 of 40

CAUTION!

Tampering with seals will void the warranty.

Notice the warranty stickers on the inner (metal) cover of the radio. The radio is sealed at

the factory. There is no need to open this cover in the field. Tampering with these seals

will void the warranty.

3.4 Installation Tools

The following tools, not provided by BridgeWave, are required for installing the radio

and the antenna:

Screwdriver, slotted 0.1 inch (2.5mm) wide

Open-end wrench 11/32 (9mm)

Open-end wrench 9/16 (14mm) - 2 ea.

Open-end wrench 1/2 (13mm)

Ratchet with 6 inch (15cm) extension and 9/16 inch (14mm) deep socket

Wire stripper/cutter/crimp tool (10-16 gauge)

Electrical tape

Fish tape for pulling cable

Cable tie wraps

Hand-held DVM (digital voltmeter) with standard banana plug receptacles

* For pricing and a quotation, visit MeridianMicrowave.com