Communications, Inc. Switch User Manual


TM
GE/AR80 Installation Manual
580-00519, rev A 21 of 40
CA
UTION!
It is very important that the azimuth bolts are tightened before any elevation adjustment is
done. The very narrow beamwidth of this antenna (0.9º) makes it necessary to completely
tighten the bolts of the azimuth adjustment while adjusting the elevation and vice versa.
1.
Loosen the 4
Azimuth lock bolts
2.
Adjust eyebolt
length using a 9/16
open-end wrench to
required location
3.
Secure the 4
Azimuth lock bolts
(tighten until lock
washers are flattened)
Figure 3
-
9 Azimuth adjustments bolts detail
* For pricing and a quotation, visit MeridianMicrowave.com
* For pricing and a quotation, visit MeridianMicrowave.com