Communications, Inc. Switch User Manual



GE/AR80 Installation Manual

580-00519, rev A 33 of 40

4 Operation of GE/AR80 & configuration of network equipment

During normal operation, the following conditions should exist at the radio:

1 The power LED should be lit—solid green;

2 The fiber LED should be lit—solid green;

3 The Link Up LED should be lit—solid green; and

4 The Link Quality BER voltage normally should be 3.0-3.3v when it is not

raining.

Figure 4-1: LEDs indicating link is up and operational

The GE80 radio does not require periodic maintenance. However, each end of

the link should be periodically inspected for visible damage or excessive

accumulation of dirt on the antenna’s radome.

* For pricing and a quotation, visit MeridianMicrowave.com