Use and Care Manual

Not for

Reproduction

Storage

Follow steps 1-5 in After Each Use.

NOTICE Water left in pump could freeze and permanently

damage pump. Freeze damage is not covered under

warranty.

Protecting the Pump

To protect the pump from damage caused by mineral

deposits or freezing, use PumpSaver, Model 6039, to treat

pump. This prevents freeze damage and lubricates plunger

and seals.

NOTICE PumpSaver is available as an optional

accessory. It is not included with the electric pressure

washer. Contact the nearest authorized service center to

purchase Pump Saver.

NOTICE You must protect your unit from freezing

temperatures.

• Failure to do so will permanently damage pump and

render unit inoperable.

• Freeze damage is not covered under warranty.

To use PumpSaver, make sure the electric pressure

washer is turned off and inlet and outlet hoses are

disconnected. Read and follow all instructions and

warnings given on the PumpSaver container.

Final Storage Procedure

1. Store unit in a clean, dry area that is protected from

freezing temperatures.

2. Cover unit with a suitable protective cover that does

not retain moisture.

3. Follow steps 6-7 in After Each Use.