User's Manual

5
Installing the doorbell
Follow the steps below to install the doorbell before use.
1. Turn off your home main power supply to avoid possible danger of electric shock.
2. Pass the two AC wires (for doorbell use) through the hole of the doorbell wall plate.
3. Fasten the wall plate with the accompanying two screws.
4. Fasten the two wires to the AC terminals of the doorbell.
5. Install the doorbell on the lower part of the wall plate and fasten them with the
accompanying hexagon screw (by using an inner hexagon screwdriver).
Fasten screw here.
Fasten screw here.
Pass AC wires through this hole.