Owner`s manual

36
37
LATCH
Checklist for proper installation:
Does your vehicle:
Have a top tether anchor in the chosen seating position? 9
Have LATCH anchors in the chosen seating position? 9
IMPORTANT: Use LATCH to position this child seat to your vehicle seat. You
must secure your child using the vehicle Lap-Shoulder belt system.
Booster Mode
Booster Mode
Detatch the Versa-Tether1
®
hook
from the storage clip.
Ensure the recline block is in the 2
booster position.
Place the child seat on the vehicle
3
seat.
Connect the LATCH connectors to 4
the LATCH anchors.
Push the child seat into the vehicle
5
seat and pull the loop end of each
LATCH strap through the belt slot
to tighten.
Attach the Versa-Tether to the
6
vehicle’s designated tether anchor
for the chosen seating position.
WARNING:
Position forward-facing only in a seating position with a lap-shoulder •
belt.
Use only the vehicle’s lap and shoulder belt system when securing •
a child in booster mode. Never secure a child with a lap belt only in
booster mode.
In booster mode, this child seat can be positioned to the vehicle seat •
using LATCH.
If the LATCH anchors in your vehicle prevent proper vehicle belt •
fit across your child you cannot use LATCH to position this seat in
booster mode.
The vehicle belt fits properly when the lap portion sits low across *
the child’s hips and the shoulder portion lies across the child’s
shoulder and does not contact the child’s neck when properly
routed through the upper belt guide
Booster Mode: Positioning Your Child Seat Booster Mode: Positioning Your Child Seat