Owner`s manual

42
43
Booster Mode
Securing Your ChildSecuring Your Child
Booster Mode
Booster Mode
Place the child seat on the vehicle 1
seat and have the child sit in the
child seat.
Adjust the head restraint so when
2
seated, the ears are below the top
of the head restraint and the vehicle
belt will be appropriately positioned
at or above the child’s shoulder
through the shoulder belt guide.
Pull the vehicle belt out.
3
Route the shoulder portion of the 4
vehicle belt through the upper belt
guide.
Fasten the vehicle belt across the
5
child.
The lap part of the vehicle *
belt should rest low on the
child’s hips.
Remove slack from the
6
vehicle belt.
The shoulder belt *
should rest on the
child’s shoulder and
not touch the neck.
Verify secure installation.
7
Check that the:
Vehicle belt is not twisted. 9
Buckle does not rest on red belt guide. 9
Shoulder portion of vehicle belt is routed through upper belt guide. 9
Lap part of the vehicle belt is routed low across the child’s hips 9
WARNING:
Booster Mode
Only use a lap-shoulder belt to secure the child in booster mode.•
Use the red belt guides on the child seat to ensure proper fit. •
Ensure the lap portion of the belt sits low across the child’s hips and •
that the shoulder portion does not contact the child’s neck.