Owner`s manual

46
47
Cover Removal continued
Replacing the Cover
Slide the buckle retainer up or 11
down to release it from the child
seat shell.
Pull the harness straps, buckle
14
tongues, HUGS™ chest pads,
and chest clip through the slots
in the cover.
Pull the lower part of the cover
15
from the bottom of the child
seat shell.
Route the cover around the head
16
restraint and remove the entire
cover from the child seat shell.
Care and Maintenance Care and Maintenance
Move the head restraint to the 1
highest position.
Remove the screw to unlock the *
head restraint adjuster. Store the
screw in a safe place.
Fit the cover around the head 2
restraint.
Be careful not to damage the *
energy-absorbing foam.
Fit the bottom of the cover over the 3
lower part of the child seat shell.
Pull the harness straps through the
4
appropriate holes in the cover.
Fit the elastic around the cup
5
holders on the bottom of the child
seat shell. (Seat shown laying on
back.)
Pull the buckle retainer away 12
from the child seat to loosen.
Turn and push the buckle
13
retainer so that the short side
will pass through the slot in the
child seat shell
Move the head restraint to the
6
lowest position. Ensure that harness
slots in cover, head restraint and
harness adjuster are aligned and
route the harness straps through the
harness slots and harness adjuster.