Owner`s manual

48
49
Re-attach the clips behind the 13
arm rests. (Seat shown laying on
back.)
Route the harness straps behind
7
the belt shield and re-attach to the
harness yoke.
Ensure the harness straps are not *
twisted.
Replace the head restraint cover 11
and re-attach the elastic loops
to hold the cover in place.
Care and Maintenance Care and Maintenance
Push the retainer through the slots 8
in the child seat shell and cover to
the bottom of the child seat.
Pull the buckle strap to tighten it *
against the child seat shell.
Slide the buckle retainer into place 9
up or down to hold it against the
child seat shell.
Buckle the harness.
10
Ensure the harness straps are *
not twisted and that the buckle
faces out.
Push the fabric into the groove 14
around the cup holder housing.
Push the fabric under the lower 15
belt guides. (Seat shown laying
on back.)
Cleaning the Cover
HAND WASH the cover using cold water and mild soap.•
LINE DRY to prevent the cover from shrinking.•
DO NOT:•
Bleach*
Machine wash*
Machine dry*
Replace screw in head restraint to
12
lock the head restraint adjuster.
Re-attach the elastic to hold 16
the cover in place. (Seat shown
laying on back.)