Owner`s manual

8
9
Harness Height Adjustment
NOTE: The harness height adjuster also adjusts the height for the head
restraint in harness mode. The head restraint will be properly adjusted once
the harness is placed appropriately at or above your child’s shoulders.
Head Restraint Adjustment
Loosen the harness by lifting the 1
harness adjuster release lever
located on the front of the child
seat while pulling BOTH harness
straps forward.
Pull the harness adjuster and slide
2
into the nearest position at or slightly
above your child’s shoulders.
NOTE: The harness adjuster will lock into place once released.
WARNING: The head restraint adjuster is for booster mode
only. DO NOT use the head restraint adjuster when the harness
is still attached.
Remove the screw from the head 3
restraint adjuster and store in a safe
place. The screw will be needed to
convert back to harness mode.
Lift the head restraint adjuster
4
release to move the head
restraint.
The vehicle belt must be
5
appropriately positioned at or
above the child’s shoulder through
the shoulder belt guide.
NOTE: The head restraint adjuster will lock into place once released.
Child Seat features OverviewChild Seat features Overview
1. Lift lever
2. Pull
BOTH
harness
straps