Owner`s manual

Fastening the Buckle

Insert one tongue at a time into the buckle.

NOTE: Proper connection is conﬁrmed with an audible click after inserting

each buckle tongue.

Releasing the Buckle

NOTE: Periodically clean the buckle to ensure proper operation.

Using the LATCH Connectors

Disconnect the LATCH 1

connectors from the LATCH

connector storage slots.

Locate the LATCH anchors in your

vehicle.

Verify that the LATCH connector

is right-side up and that the

LATCH strap is not twisted before

connecting.

NOTE: Proper connection is conﬁrmed with an audible click after attachment.

IMPORTANT: Refer to your vehicle owner’s manual or contact the vehicle

manufacturer for the maximum weight rating for their LATCH anchors.

Use the vehicle belt (not LATCH) for installations with children who weigh

more than the vehicle LATCH anchor limit. Unless speciﬁed otherwise by

the vehicle manufacturer, assume a 40 pound (18.1 kg.) child is the vehicle

LATCH anchor limit. Only use the vehicle’s designated tether anchor for the

chosen seating position.

Using the Versa-Tether

WARNING:

Attach the Versa-Tether only to tether anchors identiﬁed by your vehicle •

manufacturer as tether anchorage points.

If your vehicle does not currently have a tether anchor attachment, refer to your •

vehicle owner’s manual or contact your vehicle man u fac tur er for assistance. DO

NOT modify your vehicle without advice from your vehicle manufacturer.

When using the child seat in harness mode:

Britax recommends that the tether be used at all times when installing the child •

seat. Using the tether will improve the stability of your child seat and reduce

the risk of injury.

Always use the Versa-Tether for children weighing 65 – 80 lbs (29.5 – 36.3 kg).•

You must use the Versa-Tether if installing the child seat using the LATCH •

connectors.

Press the release button and pull the tongues from the buckle.

Child Seat features OverviewChild Seat features Overview

Top