Instruction manual

A One side at a time,
align the arm bar pin
with the frame
moulding as shown.
B Press in and hold the
engaging / release
button, then insert the
pin all the way in.
C Release the button,
then pull on the arm bar
to make sure it is
engaged. Repeat steps
A, B & C for the other side.
D To release the
arm bar, press in and
hold the release button
located under the
arm bar connector, then
pull out the arm bar.
E Rotate the arm bar
clear of the Stroller
seat to assist with
putting a child in the
Stroller.
CAUTION: When Child is in the Stroller, keep the arm bar
attached to the frame at all times.
1.12 TO FIT THE ARMBAR
F Lock the arm bar back
into position after fastening
the child in the harness.
Ensure the arm bar is
correctly installed. The
‘Caution’ text must appear
on the right hand side so it
is possible to read (not
upside down).
20