Instruction manual

1.28 TO FOLD/CLOSE THE STROLLER

• Remove the Bassinet or Infant Carrier if connected to the frame prior to folding.

• The Second Seat can either be removed or folded up prior to folding.

• The rain cover must also be removed if fitted.

NOTE: Stroller Seat and wheels can be removed to reduce the total folded size.

See sections 1.6 & 1.14 for reference. With Stroller Seat attached, folding

the leg support will also help to reduce the folded size.

FOLDING TIPS

1. It is recommended for easier handling, to take the Stroller seat off first. Then fold

the frame and put both seat and frame in the car.

2. For smaller cars it may also be convenient to simply remove the rear wheels

as well.

A Engage rear brakes.

Remove all objects from

seat back pocket and

basket and close the

canopy. Raise the handle

up one or two positions

(as shown) to avoid

contact with the wheels

when folded.

B Remove the Stroller Seat from the frame. Hold the

seat or arm bar on both sides with your hands. Then

with your finger or thumbs, press down and hold the

grey buttons. While holding the grey buttons, lift the

seat off the frame.