Instruction manual

I Attach hook and loop
tabs on canopy to the
liner on both side and in
2 places near the main
locking lever.
H Fold canopy down
(see section 2.3 (D)).
Insert the pad into the
bassinet with head rest
located at the canopy end.
G Fasten hook and
loop tabs around the
handle mouldings and
stretch the liner over
the other two corners
of the bassinet.
K Place the bassinet boot cover over the bassinet
and attach hook on the each side of the boot cover
to loop on the each side of the canopy as shown.
J To expose the mesh
section of the canopy,
fully unzip the center
section. Use the fabric
to expose or enclose
the mesh section.
To close the canopy
reverse the above
procedure.
2.3 BASSINET ASSEMBLY, FITTING &
REMOVAL cont...
42