Instruction manual

A Remove Stroller seat or Bassinet from frame,

(see sections 1.14 (B) & 2.3 (O)). The Infant Carrier

must face the Stroller handle. With the Infant Carrier

handle in the upright position, locate the Infant Carrier

handle mouldings on either side, directly over the

frame mouldings. Notice the indicator is GREEN.

B Push down on the Infant

Carrier and make sure it is

located in the frame

mouldings. The Infant

Carrier now needs to be

locked securely in frame.

C By squeezing in and

holding the latches on

either side of the handle,

rotate the handle

backwards. The GREEN

Indicator will now turn

to RED.

D Release the handle

latches. Then with one

hand holding the front of

the Infant Carrier, push the

Infant Carrier handle all

the way down until you

hear it lock into the frame.

E The handle indicator

should now be GREEN

and the Infant Carrier

should be locked into

the frame. If indicator

is RED the Infant Carrier

handle is not in the

locked position, repeat

step D

3.2 INFANT CARRIER FITTING & REMOVAL