Instruction manual

D Lower the Second Seat
frame and push down to
lock the legtubes (SS9)
into the lower Stroller frame
mouldings (S31). Repeat
step D if the frame doesn’t
lock into place.
E Pull up on the
Second Seat frame to
make sure it is locked
onto the Stroller frame.
Ensure to grasp the
Second Seat frame as
shown above.
F Raise the backrest
adjusting lever and lift the
head end of the Second
Seat so that the foot
end slides down the
Stroller frame and
engages into the
second lock (S30).
NOTE: For easier installation, rotate the Pivotal Handle in the most
upright position.
A Remove the
Accessory Bag if fitted.
Apply the Stroller brake,
rotate the pivot handle
up to create more
assembly space. Adjust
the Stroller seat to the
most upright position.
B The Second Seat
connecting pins (SS2)
need to lock into the
frame mouldings (S29).
Hold the Second Seat
frame so the leg tube
(SS9) is underneath and
facing the head end
of the Second Seat.
C While holding the
Second Seat, hook the
connecting pins (SS2)
into the frame mouldings
(S29), then pull
downwards.
SS2
S31
S29
SS2
S29
S30
SS9SS9
4.3 FITTING SECOND SEAT TO THE STROLLER
49