Instruction manual

DO NOT install the
Infant Carrier in a
forward facing position,
even when used in
conjunction with the
Second Seat. The
Infant Carrier must
always face rearward.
A To fit the infant carrier
to the second seat frame,
you must first remove the
second seat from the
stroller and remove the
softgoods.
B Lay the Second Seat
frame on a flat surface
facing upwards. Release
hook and loop tabs which
attach the canopy to the
top of the Second Seat.
D Turn the Second
Seat over so it is facing
downwards, then
release all the hook and
loop tabs.
E Undo the D rung from
the bar by sliding the
webbing through the slot.
C To remove the
canopy, press in and hold
the release tabs while
pulling the canopy out of
the frame mouldings.
F Release hook and
loop tab (1 & 2) on both
sides.
(1)
(2)
(3)
(4)
( 3)
(2)(A)
4.15 FITTING & REMOVING SOFT GOODS
FROM SECOND SEAT FRAME
60