Specification

SPECIFICATION SHEET

REFERENCE QTY. REMARKS Project

Location

Architect

Engineer

Contractor

Submitted by Date

81H 99043900C

Especially designed to protect the exterior base of

a custom hood.

FEATURES

• Cabinet mount

custom application

• 24 gauge CRS, painted silver finish

(LB30, LB36, LT30, & LT36)

• Stainless steel (LB30SS & LB36SS)

• Fits into cabinet openings as shown

• Fits custom hood nominal widths: 30’’ & 36’’

• Wipes clean easily

• Recommended for use with Models PM250, PM390,

PM500, PM250SSP & PM390SSP Power Modules

LB30, LB36,

LB30SS,

LB36SS, LT30

& LT36 LINERS

Models LB30, LB36, LB30SS & LB36SS

The “B” or Box liner is designed to fit into 18” deep wood

hood or cabinet bottoms.

Models LT30 & LT36

The “T” or liner is designed to work with wood hoods that are

integrated to the adjacent 12” deep cabinets.

NOTE: Dimensions shown in inches.

Broan-NuTone LLC | 926 West State Street, Hartford, WI 53027 | 1 888-336-3948 | www.broan.com www.nutone.com

Venmar Ventilation ULC | 550 Lemire Blvd., Drummondville, QC Canada J2C 7W9 | 1 877-896-1119 | www.broan.ca www.nutone.ca

PAGE 1
SPECIFICATION SHEET LB30, LB36, LB30SS, LB36SS, LT30 & LT36 LINERS Especially designed to protect the exterior base of a custom hood. Models LB30, LB36, LB30SS & LB36SS The “B” or Box liner is designed to fit into 18” deep wood hood or cabinet bottoms.
PAGE 2
FICHE TECHNIQUE REVÊTEMENTS D’ARMOIRE LB30, LB36, LB30SS, LB36SS, LT30 & LT36 Spécialements conçus pour protéger la base extérieure de l’armoire. Modèles LB30, LB36, LB30SS et LB36SS Le revêtement « B », ou en forme de boîte, convient à une base d’armoire d’une profondeur de 18 po.