Technical data

Brocade 6910 Ethernet Access Switch Diagnostic Guide 15
53-1002348-02
Ethernet diagnostics
===== RMON Stats =====
0 Drop Events
10305324 Octets
32060 Packets
270 Broadcast PKTS
9075 Multi-cast PKTS
0 Undersize PKTS
0 Oversize PKTS
0 Fragments
0 Internal Mac Transmit Errors
0 Internal Mac Receive Errors
0 Frames Too Long
0 Carrier Sense Errors
0 Symbol Errors
0 Pause Frames Input
show interfaces status ethernet
Syntax: show interfaces status ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12)
This command displays the operational status for Ethernet ports, as shown in the following
example.
Console# show interfaces status ethernet 1/1
Information of Eth 1/1
Basic Information:
Port Type : 1000BASE-T
MAC Address : 70-72-CF-32-DD-FE
Configuration:
Name :
Port Admin : Up
Speed-duplex : Auto
Capabilities : 10half, 10full, 100half, 100full, 1000full
Broadcast Storm : Enabled
Broadcast Storm Limit : 64 Kbits/second
Multicast Storm : Disabled
Multicast Storm Limit : 64 Kbits/second
Unknown Unicast Storm : Disabled
Unknown Unicast Storm Limit : 64 Kbits/second
Flow Control : Disabled
VLAN Trunking : Disabled
LACP : Disabled
Port Security : Disabled
Max MAC Count : 0
Port Security Action : None
Media Type : SFP preferred auto
Current Status:
Link Status : Up
Port Operation Status : Up
Operation Speed-duplex : 100full
Up Time : 0w 0d 5h 51m 29s (21089 seconds)
Flow Control Type : None