Technical data

Brocade 6910 Ethernet Access Switch Diagnostic Guide 33
53-1002348-02
Operation, Administration and Maintenance
This command displays information about remote maintenance points configured statically in a
cross-check list.
show ethernet cfm maintenance-points remote crosscheck
Syntax: show ethernet cfm maintenance-points remote crosscheck
[domain domain-name | mpid mpid]
domain-name – Domain name. (Range: 1-43 alphanumeric characters)
mpid – Maintenance end point identifier. (Range: 1-8191)
This example shows all remote MEPs statically configured on this device.
Console# show ethernet cfm maintenance-points remote crosscheck
MPID MA Name Level VLAN MEP Up Remote MAC Address
---- -------------------- ----- ---- ------ ------------------
2 downtown 4 2 Yes 00-0D-54-FC-A2-73
This command displays the contents of the link trace cache.
show ethernet cfm linktrace-cache
Syntax: show ethernet cfm linktrace-cache
This example shows the contents of the link trace cache.
Console# show ethernet cfm linktrace-cache
Hops MA IP / Alias Ingress MAC Ing. Action Relay
Forwarded Egress MAC Egr. Action
---- -------------- ----------------------- ----------------- ----------- -----
2 rd 192.168.0.6 00-12-CF-12-12-2D ingOk Hit
Not Forwarded
Operation, Administration and Maintenance
The switch provides OAM (Operation, Administration and Maintenance) remote management tools
required to monitor and maintain the links to subscriber CPEs (Customer Premise Equipment).
OAM can be used to perform loopback testing, or to display remote device information.
OAM show commands
This command displays counters for various OAM PDU message types.
show efm oam counters interface
Syntax: show efm oam counters interface [interface-list]
interface-list - unit/port
unit - Unit identifier. (Range: 1)
port - Port number or list of ports. To enter a list, separate nonconsecutive port identifiers
with a comma and no spaces; use a hyphen to designate a range of ports. (Range: 1-12)