Technical data

42 Brocade 6910 Ethernet Access Switch Diagnostic Guide
53-1002348-02
802.1x
802.1X Authenticator is enabled on port 12
Reauthentication : Enabled
Reauth Period : 3600
Quiet Period : 60
TX Period : 30
Supplicant Timeout : 30
Server Timeout : 10
Reauth Max Retries : 2
Max Request : 2
Operation Mode : Multi-host
Port Control : Auto
Intrusion Action : Block traffic
Supplicant : 00-e0-29-94-34-65
Authenticator PAE State Machine
State : Authenticated
Reauth Count : 0
Current Identifier : 3
Backend State Machine
State : Idle
Request Count : 0
Identifier(Server) : 2
Reauthentication State Machine
State : Initialize
show dot1x interface
Syntax: show dot1x interface ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12)
This command displays information about the 802.1x configuration on a specified port, as shown
in the following example.
Console# show dot1x interface ethernet 1/12
802.1X Authenticator is enabled on port 1/12
Reauthentication : Disabled
Reauth Period : 3600 seconds
Quiet Period : 60 seconds
TX Period : 30 seconds
Supplicant Timeout : 30 seconds
Server Timeout : 10 seconds
Reauth Max Retries : 2
Max Request : 2
Operation Mode : Single-Host
Port Control : Auto
Intrusion Action : Block traffic
Supplicant : 00-00-00-00-00-00
Authenticator PAE State Machine
State : Initialize
Reauth Count : 0
Current Identifier : 0