Technical data

viii Brocade 6910 Ethernet Access Switch Diagnostic Guide
53-1002348-02
Disclaimer
How to use this guide
This guide describes many common diagnostic processes for the Brocade BR6910 switch. Each
chapter contains diagnostic information about a specific segment of your network configuration.
Each topic consists of the following sections, where possible, and when the information is
applicable:
• A brief description of the topic
• Show commands related to the topic
• Configuration notes for the topic
• Common diagnostic scenarios
Supported hardware
The following hardware platforms are supported by the release of this guide:
• BR-6910-EAS-AC – Brocade 6910 Ethernet Access Switch, 12×1 GbE combination copper
10/100/1000 Base-T (RJ45) or 100/1000 Base-X SFP ports, redundant AC power supply
• BR-6910-EAS-DC – Brocade 6910 Ethernet Access Switch, 12×1 GbE combination copper
10/100/1000 Base-T (RJ45) or 100/1000 Base-X SFP ports, redundant DC power supply
• BR-6910-EAS-H-AC – Brocade 6910 Ethernet Access Switch, 12×1 GbE combination copper
10/100/1000 Base-T (RJ45) or 100/1000 Base-X SFP ports, redundant AC power supply,
temperature hardened
• BR-6910-EAS-H-DC – Brocade 6910 Ethernet Access Switch, 12×1 GbE combination copper
10/100/1000 Base-T (RJ45) or 100/1000 Base-X SFP ports, redundant DC power supply,
temperature hardened
Document conventions
This section describes text formatting conventions and important notice formats used in this
document.