Installation Guide

5
Installation
PRODUCT INSTALLATION
Please read these instructions carefully before installing
your FreshSpa Comfort+. Failure to do so could result in
flooding, leaking or damage to the product.
1. Existing Toilet Seat Removal
a. Lift hinge covers and use flathead or Phillips
head screwdriver to remove the mounting bolts.
Alternatively, you may need to loosen mounting
bolts underneath the seat.
b. Remove the toilet seat and set the seat, mounting
bolts and hardware aside.
2. Turn O Water Supply Valve and Flush Toilet
a. Turn water supply valve o to stop the flow of water.
b. Flush toilet and hold down handle to completely
empty tank.
c. Disconnect water supply hose from toilet tank.
Do not disconnect from the water supply valve.
3. Connect Cold Water T-Valve to the Toilet Tank Fill Valve
a. Install the ⁄" cold water T-valve with one or both
of the large rubber washers to the incoming water
connection on the bottom of your toilet tank.
b. Connect the cold water supply line coming from the
wall to the bottom of the T-valve.
4. Connect Bidet Hose to T-Valve
Connect one end of the braided metal cold water
bidet hose to the remaining open side of the
installed T-valve.
Step 3a
Step 3b
Step 1b
Step 2c
Step 4