Owner's Manual & Installation Guide

USING THE SWASH SE400 (cont.)

Auto Mode

Pressing the “Auto Mode” button will initiate a one-minute Rear Wash with the following

parameters preset:

• Seat Temperature set to Medium

• Nozzle Oscillation (Move) on

• Water Pressure set to Level 3

• Water Temperature set to Medium

After the wash cycle is over, Auto Mode will initiate a one-minute Warm Air Dry cycle on Level 2.

Note: All wash and dry settings are adjustable, while the Auto Mode wash cycle is running, to suit

your preferences

Eco Mode

In this mode the water in the tank and the seat temperature will be heated to 86°F when the

bidet is not in use. Once a person sits on the bidet the Swash will revert to the last seat and water

temperature settings used. To select this option press and release the “Eco Mode” button to

illuminate its indicator.