Instructions / Assembly

8/15

ASSEMBLY

STEP 1

1. Insert Dowel 6 into Divider C .

2. Use rubber mallet to tap Wood Dowels 6 into holes securely. 1/2 length of dowels

should be exposed.

3. Align drilled holes on bottom of Back F with Dowel 6 on Divider C .

( Note: please pay close attention to the location of the 2 small guide holes which

accommodate the lid support. They need to be on the same side as the hinges .)

4. Using 2 Allen Key Screws 3 to attach Back F to Divider C .

MODEL # 3AXCADABEN-ALB

Small pre-drilled holes

Hinge

/ Vertic