User's Manual

BSSK9015 draft user manual
1. Image
2. Power on/off
2.1 Power on: Long press Power on/off button for three seconds, the LED is flash white, power on.
2.2 Power off: Long press Power on/off button for three seconds, the LED turn off, power off.
3. Bluetooth connection: Bluetooth pairing name isBrookstone BSSK9015
3.1 1
st
time connect: After speaker powered on, turn on the BT on your device and choose "Brookstone
BSSK9015". After connected with device, the speaker LED breathe WHITE every 10S.
3.2 If the speaker connected with a device before, it will automatically go into pairing mode and connected with
that device when powered on. (For Apple device, if power on the speaker firstly, then turn on BT on the device, it
won't connect automatically, but if turn on BT on the device firstly, then power on the speaker, it will connect
automatically. No this issue for Android device, because it depends on BT agreement on the device.)
3.3 Disconnection: Short press Bluetooth button to disconnect the current device for searching new one, LED
flash white after disconnect. Short press again to reconnect the last device, LED breathe every 10 seconds after
connected.
4. Music Mode:
Power on/off button;
Play/Pause button
Volume- button;
Previous Song button
Built-in Mic
Bluetooth Button
Volume+ button;
Next Song button

Summary of content (4 pages)