Virtual Keyboard You’ve never typed like this before
Table of contents Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Location of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CAUTION • T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. THERE ARE NO SERVICEABLE PARTS INSIDE. • T O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
DANGER To reduce the risk of electric shock, burns, fire or injury: 1. Do not use while bathing or in a shower. 2. Do not place or store unit where it can fall or be pulled into a tub or sink. 3. Do not place in, drop or submerge in water or other liquid. 4. Do not reach for unit that has fallen into water. Unplug it immediately. 5. C are should be taken so that objects do not fall and liquids are not spilled onto the unit. WARNING 1.
8. N ever operate this unit if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged, or dropped into water. If the unit’s power supply cord or plug is damaged, do not attempt to fix it yourself. 9. T o avoid the risk of electric shock, do not disassemble or attempt to repair the unit. Incorrect repair can cause risk of electric shock or injury to persons when unit is used. 10. Do not operate in the presence of explosive and/or flammable fumes. 11.
Safety Precautions 1. A void exposing this product to direct sunlight for extended periods of time, and keep it away from heat sources. 2. T here is a risk of malfunction if product is used in places where sudden or extreme temperature changes occur. 3. A pplying excessive force or impact to this product may result in product damage, and will void warranty. 4. T o ensure safety and prevent damage, use only the dedicated mini-USB to USB cable supplied with this product. 5.
Cautions 1. F or safety reasons, be sure to use only the mini USB to USB cable specified for this product. 2. Make sure to fully charge the battery before using the product for the first time. 3. Battery charging times may vary slightly depending on the ambient temperature. 4. T he battery may not be charged to 100 percent of its rated cell capacity even when the battery status icon indicates all green lights. 5.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
RF Exposure Information The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Caution 1. B attery may explode if replaced with an incompatible battery. Dispose the used batteries according to the instructions. “This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.” 2.
Notes for optimal product usage Conditions to Avoid: 1. Avoid direct sunlight. 2. A void low color temperature light source, such as tungsten, halogen, or incandescent lamp. 3. Avoid uneven or irregular surfaces. Place the product on flat surfaces. 4. Avoid a table or surface that is as transparent or reflective as glass or mirror. 5. A void placing any objects within the space between the main unit and the laser projected keyboard layout.
Location of controls 1. 2. 3. 4. Power Switch Keyboard Pattern Projector Sensor OLED Screen Showing: Battery/Bluetooth®/Keyboard/ Mouse/Charging/Operating Settings 5. Infrared Beam 6. Key Ring Strap 7. Micro USB Port 1 Identifying Parts and their Functions. 2 3 4 5 6 Projector: Uses a red laser to project the image of a keyboard onto a flat surface in front of the typist.
Charging The Virtual Keyboard has a built-in Rechargeable Lithium-ion Polymer Battery. The Battery Operating Time is approximately 120 minutes. Use the USB cable (included) to charge the Virtual Keyboard’s battery. Simply connect the Virtual Keyboard to a 2.1 USB outlet to charge. Charging time is approximately 240 minutes. When the charging is complete all battery status bars will be filled in on the battery status icon shown on the display.
Bluetooth connection 1. Power on Virtual Keyboard. 2. B luetooth icon will blink, indicating the device is searching for a new or previously paired device within its proximity. This will last 30 seconds. 3. Upon successful pairing, the Bluetooth icon will stop blinking. Note: If the Virtual Keyboard cannot locate a new or previously paired host device within 30 seconds, it will discontinue the Bluetooth search and the Bluetooth icon will disappear.
Connecting to Android Devices Some Android 2.0 and later devices support Bluetooth and do not require installation of a separate driver. Please visit our Website Brookstone.com for more information on Android drivers. 1. Turn on Virtual Keyboard by pressing and holding the power button. A blinking Bluetooth icon indicates that the device is ready to pair. 2. On your device, locate and select Bluetooth. 3. L ocate and select “CTX - VK200” under devices and follow the on-screen instructions. 4.
Connecting to PC (Bluetooth/USB) Connecting via Bluetooth If your computer supports Bluetooth installation, a separate driver is not required. 1. T urn on Virtual Keyboard by holding the power button for 2 seconds. A blinking Bluetooth icon indicates that the device is ready to pair. 2. P lease check your PC and make sure Bluetooth is on. With Bluetooth on, click the Bluetooth icon on the task bar. Windows will search and locate “CTX - VK200.
Connecting via USB for Windows & Mac (Plug-n-play) 1. C onnect the host device and Virtual Keyboard using the Micro-USB to USB cable provided. 2. Turn on Virtual Keyboard. 3. S uccessful connection is indicated by the virtual keyboard screen displaying a “U” in the top right hand corner. Note: Windows 7 supports multi-touch mouse function. To switch from keyboard to mouse mode, press and hold “FN” button and tap the M key. To change back to keyboard mode, tap M again.
Below are examples of how to operate the Virtual Keyboard in Mouse Mode. Control the Curser Drag & Scroll Click & Right Click Forward & Back Zoom In & Out Note: Special keys Not all keys displayed on projection keyboard layout correspond to input keys on host device. For example, MENU key will not function on a host device that does not support the MENU function. Same applies to FN and ALT function keys.
Adjusting key stroke sound level Press and hold FN key and press S key. Continually pressing the FN key and pressing the S key will cycle through all available sound levels. There are 4 levels of sound, including mute. You will see your current sound level displayed on the screen. The sound level remains as adjusted when device is turned off and on. Note: Please consider those around you when adjusting sound level. Adjusting keyboard brightness Press and hold FN key and press B key.
Note: To exit calibration mode at any time, press the FN and C key, again. No calibration information will be saved until the entire calibration mode has been completed. Quick Key Reference Guide Bluetooth: 1. 2. 3. 4. Searching Last Device (Bluetooth icon blinking). Searching New Device (Bluetooth icon blinking). Successful Pairing (Bluetooth icon solid). Disconnected (Bluetooth icon not visible). USB Connection: U will be displayed when USB cord is plugged into computer.
Quick Key Reference Guide (continued) Reset (FN and R): Must press R twice. Switching Between Mouse/Keyboard Mode: (FN and M). Turning Keyboard Display (On/Off): Tap three keys at once. Specifications Pattern Projector Light Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Red Laser Diode Keyboard Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Approx. 19mm Pitch, QWERTY layout Keyboard Size . . . .
Specifications Electrical Characteristics External Power Supply . . . . . . . . . . . . . . . . . . . . . . . . USB Power/less than 5V 500mA Battery and Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . Lithium-ion Polymer Battery, 500mAh (MAX) @ 3.7V Battery Operating Time . . . . . . . . . . . . . . . . . . . . . . . Approx. 120 minutes Battery Charging Time . . . . . . . . . . . . . . . . . . . . .
One (1) Year Limited Warranty Brookstone® warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser (“Warranty Period”).
suppliers other than Brookstone may provide their own warranties to the purchaser, but Brookstone, in so far as permitted by law, provides these products “as is.
Find thousands more great ideas online 796246 Merrimack, New Hampshire USA 03054 • 800-846-3000 • Brookstone.