User Manual
Table Of Contents
- Online User's Guide ADS-1200/ADS-1700W
- Table of Contents
- Before You Use Your Brother Machine
- Introduction to Your Brother Machine
- Paper Handling
- Scan
- Before Scanning
- Scan Using Bus Power Mode
- Scan Using the Scan Functions on Your Brother Machine
- Save Scanned Documents on Your Computer
- Save Scanned Documents Using Scan to Workflow Function
- Save Scanned Documents to a USB Flash Drive
- Send Scanned Data to an Email Server
- Set Up the Address Book
- Scan to FTP
- Scan to SFTP
- Scan to Network
- Web Services for Scanning on Your Network (Windows 7, Windows 8 and Windows 10)
- Scan Options Using the Touchscreen
- Restrict Scan Functions from External Devices
- Scan from Your Computer (Windows)
- Scan from Your Computer (Mac)
- Network
- Supported Basic Network Features
- Network Management Software and Utilities
- Additional Methods of Configuring Your Brother Machine for a Wireless Network
- Before Configuring Your Brother Machine for a Wireless Network
- Configure Your Machine for a Wireless Network Using the One-Push Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard
- Use Wi-Fi Direct®
- Scan from Your Mobile Device Using Wi-Fi Direct
- Configure Your Wi-Fi Direct Network
- Wi-Fi Direct Network Configuration Overview
- Configure Your Wi-Fi Direct Network Using the One-Push Method
- Configure Your Wi-Fi Direct Network Using the One-Push Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct Network Using the PIN Method
- Configure Your Wi-Fi Direct Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Wi-Fi Direct Network Manually
- Advanced Network Features
- Technical Information for Advanced Users
- Security
- Lock the Machine Settings
- Network Security Features
- Secure Function Lock 3.0
- Manage Your Network Machine Securely Using SSL/TLS
- Certificates and Web Based Management
- Send an Email Securely
- Brother iPrint&Scan for Windows and Mac
- Troubleshooting
- Routine Maintenance
- Machine Settings
- Appendix
Difficulties Cause Suggestions
The document was not
fed.
Paper dust has accumulated on the
surface of the Pick Up Roller or
Separation Pad.
Clean the Separation Pad and Pick Up Roller. See
Related Information: Clean the Scanner and
Rollers.
Too many documents are loaded in
the ADF at a time.
Make sure you do not exceed the ADF's capacity.
See Related Information: Acceptable Documents.
There are foreign objects in the ADF. Remove any foreign objects or ripped paper from
the ADF.
Your media is too thin or too thick. Make sure your media is acceptable for the
machine.
See Related Information: Acceptable Documents.
Remote Setup is in process. Cancel Remote Setup.
Paper ejection has paused. Remove any paper from the ADF.
Plastic Card Mode is selected in the
Feed Selector.
Slide the Feed Selector to the ADF Mode side.
A plastic card is inserted in the Card
Slot.
Remove the plastic card.
The document was curled. Straighten the curled document and scan again.
The Pick Up Roller cover film is
folded or removed.
Contact your Brother dealer or Brother Customer
Service to replace the Pick Up Roller Cover.
The Separation Pad is not set
correctly or the rubber part of the
Separation Pad is folded.
Make sure the Separation Pad is set correctly.
The leading edges of the document
are aligned straight.
Fan the paper and position the pages so that the
leading edges are aligned at a slight angle in the
feed direction.
The document is
jammed.
Paper dust has accumulated on the
surface of the Pick Up Roller or
Separation Pad.
Clean the Separation Pad and Pick Up Roller. See
Related Information: Clean the Scanner and
Rollers.
There are foreign objects in the ADF. Remove any foreign objects or ripped paper from
the ADF.
Your document is not acceptable for
the machine.
Make sure your document is acceptable for the
machine. See Related Information: Acceptable
Documents.
The document was curled. Straighten the curled document and scan again.
The Separation Pad is not set
correctly or the rubber part of the
Separation Pad is folded.
Make sure the Separation Pad is set correctly.
The paper dust has accumulated on
the sensors.
Clean the sensors.
The Pick Up Roller cover film is
folded or removed.
Contact your Brother dealer or Brother Customer
Service to replace the Pick Up Roller Cover.
The leading edges of the document
are aligned straight.
Fan the paper and position the pages so that the
leading edges are aligned at a slight angle in the
feed direction.
The scan quality is poor. Paper dust has accumulated on the
surface of the Pick Up Roller or
Separation Pad.
Clean the Separation Pad and Pick Up Roller. See
Related Information: Clean the Scanner and
Rollers.
Paper dust has accumulated on the
surface of the glass strips inside the
machine.
Clean the glass strips inside the machine.
See Related Information: Clean the Scanner and
Rollers.
The scanner resolution is too low. Increase the scanner resolution.
154