Owner's Manual

LK3-B438E Mark II

3-5. Installing the rubber cushions

3-6 . Installing the oil pan

3-7 . Installing the cushions

Install the rubber cushions q with the nails w.

1. Insert the tabs of the oil pan w into the holes for

the cushions q, and then secure it in place with

the five nails e so that the oil pan w is not at an

angle.

2. While pushing the oil pan w down from above,

screw in the oil container r.

Place the two cushions q into the holes in the work

table so that the notches are aligned with the tabs in

the oil pan, and secure them in place with the nails w.

3. INSTALLATION