Owner's Manual

LK3-B438E Mark II

CAUTION

3-17 . Installing the motor cover

1. Install the motor cover q to the motor back cover

w with the screws e and the flat washers r.

2. Pass the motor shaft through the notch in the mo-

tor back cover w, and then tighten the screws y

and the washers u so that the clearance between

the motor pulley t and the motor cover q is

uniform.

3-18 . Installing the spool stand

Assemble the spool stand q while referring to the

spool stand instruction manual, and then install the

spool stand q at the right side of the work table.

3-20 . Installing the eye guard

Attach all safety devices before using the

sewing machine.

If the machine is used without these de-

vices attached, injury may result.

Install the eye guard assy w to the face plate q with

the two screws e.

3. INSTALLATION

3-19 . Installing the button tray

1. Install the button tray holder q with the two flat

wood screws w at a place convenient for opera-

tion.

2. Insert the button tray e into the button tray holder

q , and secure them wiith the screw r .