Owner's Manual

LK3-B438E Mark II
17
5 . OPERATION
5-1 . Name and function of each operation panel item
SELECT
PROGRAM NO.
RESET
COUNTER
X
-
SCALE
Y
-
SCALE
SPEED
P
TEST
BOBBIN.WIND
P4P3
P1 P2
POWER
B430E Series
q
w
r
e
t
y
u
i
o
!0
!1
!4
q POWER indicator .................. Illuminates when the power switch has been turned on.
w RESET switch ...................... . Press this switch to reset the machine when an error occurs.
e TEST switch ......................... Use this switch when you want to operate only the feed mechanism in order
to check a pattern.
r TEST indicator ...................... Illuminates when the TEST switch has been pressed.
t BOBBIN. WIND switch ......... Press this switch to wind the lower thread.
y SELECT switch ..................... Use this switch to select a menu (program number, X and Y feed, speed and
counter). Each time the switch is pressed, one of the menu indicators (u to
!1) illuminates, and the setting for that menu item appears in the display !4.
The illiminated indicator changes as follows each time the switch is pressed.
PROGRAM NO. indicator u →X-SCALE indicator i →Y-SCALE indicator o →SPEED indicator !0 →COUNTER indicator !1
u PROGRAM NO. indicator ..... Illuminates when the SELECT switch y is pressed to shown the program
number setting.
5 . OPERATION