User`s guide

Table Of Contents
Chapter 5
40
Additional sending
operations
5
Sending faxes using multiple
settings 5
When you send a fax you can choose any
combination of these settings: resolution,
contrast, scan size, overseas mode, delayed
fax timer, polling transmission and real time
transmission.
a Press (Fax).
The LCD shows:
b Press d or c to display a setting you
want to change and press the setting,
then press the option you want.
c Repeat step b to change more settings.
Note
Most settings are temporary and the
machine returns to its default settings after
you send a fax.
You can save some of the settings you
use most often by setting them as default.
These settings will stay until you change
them again. (See Setting your changes as
the new default on page 43.)
Contrast 5
If your document is very light or very dark, you
may want to change the contrast. For most
documents the factory setting Auto can be
used. It automatically chooses the suitable
contrast for your document.
Use Light when sending a light document.
Use Dark when sending a dark document.
a Press (Fax).
b Press d or c to display Contrast.
c Press Contrast.
d Press Auto, Light or Dark.
Note
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting in any of the following conditions:
When you send a color fax.
When you choose Photo as the Fax
Resolution.
FAX/TEL
FAX/TEL
Fax Resolution
Standard
Standard
Contrast
Auto
Auto
Broadcasting
Off
Off
Speed DialHistory