Quick Start Manual

TAPE MARGIN FUNCTION

The tape margin function allows you to adjust the size of the margins on the left and

right sides of your text. In addition, the NONE tape margin setting can be used to print

one label with many different format styles.

The default tape margin setting is FULL; however, two other settings are also available.

☞

If an instant-lettering (rub-on) or iron-on tape cassette is installed, the text will

be printed with the FULL setting (1” (24 mm) margins), even if a different tape

margin setting is selected.

After printing a label with the tape margin function set to NONE, hold down

and press once to feed the tape before pressing in the tape cutter

lever to cut it, otherwise some of the printed characters may be cut off as shown

below.

After printing using the HALF tape margin setting, press in the tape cutter lever

to cut off the label, and then use scissors to cut along the printed dots (:) to cen-

ter the text within the label.

FULL

(1” (24 mm)

margins)

NONE

(no margins)

HALF

(1/2” (12 mm)

margins)

Code

Feed

Sym.