Quick Start Manual

ManualsBrandsBrother ManualsPrintersBrother Brother QL-710W

* Two digits are needed to print each part of the data for an 1-2/5 barcode. Therefore, if

an odd number of digits are entered, “0” is automatically added at the beginning of the

data when the barcode is printed. However, “0” does not appear on the LCD display.

To use the barcode function:

1 Hold down and press .

☞

To change the data or parameters of a barcode that has already been cre-

ated, position the cursor below the barcode mark ( ) before holding

down and pressing .

A label can only contain one barcode. If a barcode has already been

entered when is held down and is pressed, the error mes-

sage “1 BAR CODE / LABEL” will appear.

To quit the barcode function without making any changes, hold down

and press .

2 Type in the new barcode data or edit the old data.

To change the barcode parameter settings:

3 Press .

EAN128 4 through 22

All ASCII charac-

ters

CODABAR 4 through 22

Numbers, letters,

and symbols –, $,

:, /, ., and +

Start and stop

codes must be

A, B, C, or D

UPC-E 6 Numbers

UPC-A 13 Numbers

EAN8 8 Numbers

EAN13 13 Numbers

I-2/5 Even number of digits* Numbers

Protocol

Number of digits (includ-

ing check digits and start

and stop codes)

Characters that

can be used

Notes

Code

Barcode

Code

Barcode

Code

Barcode

Code

Barcode

Home