Quick Start Manual

50
☞ To return to the barcode data display without changing any parameter set-
tings, press .
4 Press or until the parameter that you wish to change appears.
5 Press or until the desired setting is displayed.
6 Repeat steps 4 and 5 until all parameters are set as you wish.
7 Press .
To add a special character to the barcode data:
8 Press or until the cursor is below the character immediately to the
right of where you want to add special character.
9 Press .
0 Press or until the desired special character is displayed.
☞
The following special characters can only be entered when using proto-
cols CODE 39 or CODABAR.
The following special characters can only be entered when using proto-
cols EAN 128 and CODE128.
Symbol Character
1+
2$
VALUE
SPECIAL
CHARACTER
VALUE
SPECIAL
CHARACTER
VALUE
SPECIAL
CHARACTER
3 # 69 ENQ 87 ETB
4 $ 70 ACK 88 CAN
11 + 71 BEL 89 EM
28 < 72BS90SUB
29 = 73HT91ESC
Clear
BS
Home
End
Memory
Feed
Sym.
Home
End