Quick Start Manual

55
NUMBERING FUNCTION
This function can be used to print many copies of the same text while increasing a cer-
tain number in the text by 1 after each label is printed. This type of automatic incre-
mentation is very useful when printing serial number labels, production control labels
or other labels requiring ascending codes.
To use the numbering function:
1 Press , , or to position the cursor below the number that you
wish to increase.
2 Hold down and press . The message “NUMBER UNTIL 1–9?”
appears in the display.
☞
To quit the numbering function without printing, hold down and
press (or press just ).
3 Press the number key ( to ) of the last number that is to be printed.
4 Press (or ) to begin printing the labels. The number of each copy is dis-
played while it is being printed.
☞
After printing with the tape margin function set to NONE, hold down
and press once to feed the tape before cutting it, otherwise
some of the printed characters may be cut off.
5 Press in the tape cutter lever to cut the tape, and then use scissors to cut along the
printed dots to separate the labels.
EXAMPLE
To print three door labels for studios 1, 2 and 3:
1 Position the cursor below “1”.
Home
End
Code
V
Number
Code
V
Number
Clear
BS
1
Size
9
Frame
PrintPrint
Memory
Code
Feed
Sym.
Caps
1: STUDIO 1 _
CLEAR
A
A
A
A A
Length
Wide
A A A A A Auto
Underline
Frame
AA