Quick Start Manual

64
TROUBLESHOOTING
Problem Remedy
1. The display stays blank
after you have turned on
the machine.
• Check that the correct AC adapter (AD-60) is
being used and that it is connected correctly.
• If you are using alkaline batteries, check that
they are correctly inserted.
• If the batteries are low, replace them with new
ones.
2. The machine does not
print or the printed char-
acters are blurred.
• Check that the correct AC adapter (AD-60) is
being used and that it is connected correctly.
• Check that the tape cassette has been inserted
properly.
• If the tape cassette is empty, replace it with a
new one.
• Make sure that the back cover has been
attached.
3. The text files that you
stored in the memory are
no longer there.
• If the batteries are low, replace them with new
ones.
4. The printed characters
are not formed properly.
• If you are using alkaline batteries, they may be
low. Try using the AC adapter or replace the
batteries with new ones.
• Check that the correct AC adapter (AD-60) is
being used and that it is connected correctly.
5. A blank horizontal
white line appears
through the printed
label.
• Clean the print head as explained on page 10
and 10.
6. Striped tape appears. • You have reached the end of the tape.
Replace the tape cassette with a new one.
7. The machine has
“locked up” (i.e., nothing
happens when a key is
pressed).
• Turn off the machine, and then while holding
down and , turn the machine back
on. The text in the display, all format settings,
and all text files stored in the memory are
erased.
Code
Clear
BS