User`s guide
Table Of Contents
- SOFTWARE USER’S GUIDE
- Table of Contents
- 1 Using the machine as a printer
- Using the Brother printer driver
- How to print your document
- Simultaneous printing and faxing
- Printer operation key
- Printer driver settings (For Windows®)
- How to access the printer driver settings (For Windows®)
- Features in the PCL printer driver (For Windows®)
- Features in the PS (PostScript®) Brother printer driver (MFC-7225N and MFC-7820N only) (For Windows®)
- Status Monitor (Windows® only)
- 2 How to scan using Windows®
- Scanning a document using WIA driver (For Windows® XP only)
- Scanning a document using the TWAIN driver
- Using the Scan key (For USB or Parallel cable users)
- Using ScanSoft® PaperPort® 9.0SE and OmniPage® OCR
- 3 Using ControlCenter2.0 (For Windows®)
- 4 Using MFC Remote Setup (For Windows®) (not available for DCP-7020)
- 5 Using Brother PC-FAX software (For Windows®) (not available for DCP-7020)
- PC-FAX sending
- Speed-Dial setup
- Brother Address Book
- Setting up a Member in the Address Book
- Setting up a Group for Broadcasting
- Editing Member information
- Deleting a Member or Group
- Exporting the Address Book
- Importing to the Address Book
- Sending a file as a PC-FAX using the Facsimile style user interface
- Sending a file as a PC-FAX using the Simple style user interface
- Setting up PC-FAX receiving
- 6 Network Scanning (For Windows®) (MFC-7225N, MFC-7820N or models with the optional NC-2200w Only)
- 7 Using your machine with a Macintosh®
- Setting up your USB-equipped Apple® Macintosh®
- Using the Brother printer driver with your Apple® Macintosh® (Mac OS® X)
- Using the Brother printer driver with your Apple® Macintosh® (Mac OS® 9.1 to 9.2)
- Using the PS driver with your Apple® Macintosh® (MFC-7225N and MFC-7820N only)
- Sending a fax from your Macintosh® application (not available for DCP-7020)
- Scanning from a Macintosh®
- Configuring Network Scanning
- Using Presto!® PageManager®
- Using ControlCenter2.0 (For Mac OS® X 10.2.4 or greater)
- MFC Remote Setup (Mac OS® X 10.2.4 or greater) (not available for DCP-7020)
- Index
- brother USA/CAN
Using your machine with a Macintosh
®
7 - 24
7
Using ControlCenter2.0 (For Mac OS
®
X 10.2.4 or greater)
ControlCenter2.0 is a software utility that allows you to quickly and easily access the most frequently used
applications. Using ControlCenter2.0 eliminates the need to manually launch the specific applications.
ControlCenter2.0 provides the following five categories of operations:
1
Scan directly to a file, E-mail, word processor or graphics
application of your choice.
2
Custom Scan buttons allow you to configure a button to
meet your own application requirements.
3
Access the Copy features available via your Macintosh
®
.
4
Access the settings available to configure your device.
(not available for DCP-7020)
Note
The functions that can be used in ControlCenter2.0 may vary depending upon the model.
You can open the configuration window for each function by clicking the
Configuration
button.
Also you can select which machine will connect with ControlCenter2.0 from the
Model
pull-down list.
How to turn off the AutoLoad feature in ControlCenter2.0
The icon will appear on the menu bar. To open the ControlCenter2.0 window, click on the icon and select
Open
.
If you do not want ControlCenter2.0 to run automatically each time the computer is started;
1
Click on the ControlCenter2.0 icon in the menu bar and select
Preference
.
2
The ControlCenter2.0 preference window appears, then
uncheck the
Start ControlCenter on computer startup
check box.
3
Click
OK
to close the window.
Note
The ControlCenter2.0 application icon is in Macintosh HD/Library/Printers/Brother/Utilities/ControlCenter.