User`s guide
Table Of Contents
- SOFTWARE USER’S GUIDE
- Table of Contents
- 1 Using the machine as a printer
- Using the Brother printer driver
- How to print your document
- Simultaneous printing and faxing
- Printer operation key
- Printer driver settings (For Windows®)
- How to access the printer driver settings (For Windows®)
- Features in the PCL printer driver (For Windows®)
- Features in the PS (PostScript®) Brother printer driver (MFC-7225N and MFC-7820N only) (For Windows®)
- Status Monitor (Windows® only)
- 2 How to scan using Windows®
- Scanning a document using WIA driver (For Windows® XP only)
- Scanning a document using the TWAIN driver
- Using the Scan key (For USB or Parallel cable users)
- Using ScanSoft® PaperPort® 9.0SE and OmniPage® OCR
- 3 Using ControlCenter2.0 (For Windows®)
- 4 Using MFC Remote Setup (For Windows®) (not available for DCP-7020)
- 5 Using Brother PC-FAX software (For Windows®) (not available for DCP-7020)
- PC-FAX sending
- Speed-Dial setup
- Brother Address Book
- Setting up a Member in the Address Book
- Setting up a Group for Broadcasting
- Editing Member information
- Deleting a Member or Group
- Exporting the Address Book
- Importing to the Address Book
- Sending a file as a PC-FAX using the Facsimile style user interface
- Sending a file as a PC-FAX using the Simple style user interface
- Setting up PC-FAX receiving
- 6 Network Scanning (For Windows®) (MFC-7225N, MFC-7820N or models with the optional NC-2200w Only)
- 7 Using your machine with a Macintosh®
- Setting up your USB-equipped Apple® Macintosh®
- Using the Brother printer driver with your Apple® Macintosh® (Mac OS® X)
- Using the Brother printer driver with your Apple® Macintosh® (Mac OS® 9.1 to 9.2)
- Using the PS driver with your Apple® Macintosh® (MFC-7225N and MFC-7820N only)
- Sending a fax from your Macintosh® application (not available for DCP-7020)
- Scanning from a Macintosh®
- Configuring Network Scanning
- Using Presto!® PageManager®
- Using ControlCenter2.0 (For Mac OS® X 10.2.4 or greater)
- MFC Remote Setup (Mac OS® X 10.2.4 or greater) (not available for DCP-7020)
- Index
- brother USA/CAN
Using your machine with a Macintosh
®
7 - 26
7
DEVICE SETTINGS (not available for DCP-7020)
You can configure the machine settings.
■
Remote Setup
— enables you to open the Remote Setup Program. (See MFC Remote Setup (Mac OS
®
X 10.2.4 or greater) (not available for DCP-7020) on page 7-36.)
■
Quick-Dial
— enables you to open the Set Quick-Dial window of the Remote Setup. (See MFC Remote
Setup (Mac OS
®
X 10.2.4 or greater) (not available for DCP-7020) on page 7-36.)
Note
When the machine is connected to a network, you cannot use these functions.
SCAN
This section contains four buttons for
Scan to Image
,
Scan
to OCR
,
Scan to E-mail
and
Scan to File
applications.
These four selections can be accessed from
ControlCenter2.0 or from the
Scan
key on the control panel
of the machine. The
Target Application
,
File Type
and scan
settings are configured independently by choosing the
Software Button
or
Device Button
tabs of the
ControlCenter2.0
Configuration
window.
Image (example: Apple PreView)
Scan to Image
feature allows you to scan an image directly
into your graphics application for image editing. To change
the default settings, click on the button while holding down the
Ctrl key and select
Software Button
or
Device Button
.