User`s guide
Table Of Contents
- SOFTWARE USER’S GUIDE
- Table of Contents
- 1 Using the machine as a printer
- Using the Brother printer driver
- How to print your document
- Simultaneous printing and faxing
- Printer operation key
- Printer driver settings (For Windows®)
- How to access the printer driver settings (For Windows®)
- Features in the PCL printer driver (For Windows®)
- Features in the PS (PostScript®) Brother printer driver (MFC-7225N and MFC-7820N only) (For Windows®)
- Status Monitor (Windows® only)
- 2 How to scan using Windows®
- Scanning a document using WIA driver (For Windows® XP only)
- Scanning a document using the TWAIN driver
- Using the Scan key (For USB or Parallel cable users)
- Using ScanSoft® PaperPort® 9.0SE and OmniPage® OCR
- 3 Using ControlCenter2.0 (For Windows®)
- 4 Using MFC Remote Setup (For Windows®) (not available for DCP-7020)
- 5 Using Brother PC-FAX software (For Windows®) (not available for DCP-7020)
- PC-FAX sending
- Speed-Dial setup
- Brother Address Book
- Setting up a Member in the Address Book
- Setting up a Group for Broadcasting
- Editing Member information
- Deleting a Member or Group
- Exporting the Address Book
- Importing to the Address Book
- Sending a file as a PC-FAX using the Facsimile style user interface
- Sending a file as a PC-FAX using the Simple style user interface
- Setting up PC-FAX receiving
- 6 Network Scanning (For Windows®) (MFC-7225N, MFC-7820N or models with the optional NC-2200w Only)
- 7 Using your machine with a Macintosh®
- Setting up your USB-equipped Apple® Macintosh®
- Using the Brother printer driver with your Apple® Macintosh® (Mac OS® X)
- Using the Brother printer driver with your Apple® Macintosh® (Mac OS® 9.1 to 9.2)
- Using the PS driver with your Apple® Macintosh® (MFC-7225N and MFC-7820N only)
- Sending a fax from your Macintosh® application (not available for DCP-7020)
- Scanning from a Macintosh®
- Configuring Network Scanning
- Using Presto!® PageManager®
- Using ControlCenter2.0 (For Mac OS® X 10.2.4 or greater)
- MFC Remote Setup (Mac OS® X 10.2.4 or greater) (not available for DCP-7020)
- Index
- brother USA/CAN
Network Scanning (For Windows
®
)
6 - 2
6
2
Click the
Network Setting
tab in the dialog box and
select a method to specify the machine as a Network
scanner for your PC.
Specify your machine by address
Enter the IP address of the machine in the
IP Address
field.
Click
Apply
and then
OK
.
Specify your machine by Name
Enter the machine Node name in the
Node Name
field.
Click
Apply
and then
OK
.
Search for Devices
Click
Browse
and select the appropriate device you want to
use.
Click
OK
.
Click
Apply
and then
OK
.
3
Click the
Scan To Button
tab in the dialog box and enter
your PC name in the
Display Name
field. The machine's
LCD displays the name you enter. The default setting is
your PC name. You can enter any name that you like.
Note
The settings in this window have no relevance when being
used with the optional wireless print/scan server NC-2200w.
If you followed the installation steps in the Quick Setup Guide,
then the scanning destination settings have already been
configured. If you need to change the settings, see the
NC-2200w Network User’s Guide for details.
4
You can avoid receiving unwanted documents by setting a 4-digit Pin number. Enter your Pin number in
the
Pin number
and
Retype Pin number
field. To send data to a PC protected by a Pin number, the
LCD prompts to enter the Pin number before the document can be scanned and sent to the machine.
(See Using the Scan key on page 6-3 to 6-6.)