User`s guide
Table Of Contents
- SOFTWARE USER’S GUIDE
- Table of Contents
- 1 Using the machine as a printer
- Using the Brother printer driver
- How to print your document
- Simultaneous printing and faxing
- Printer operation key
- Printer driver settings (For Windows®)
- How to access the printer driver settings (For Windows®)
- Features in the PCL printer driver (For Windows®)
- Features in the PS (PostScript®) Brother printer driver (MFC-7225N and MFC-7820N only) (For Windows®)
- Status Monitor (Windows® only)
- 2 How to scan using Windows®
- Scanning a document using WIA driver (For Windows® XP only)
- Scanning a document using the TWAIN driver
- Using the Scan key (For USB or Parallel cable users)
- Using ScanSoft® PaperPort® 9.0SE and OmniPage® OCR
- 3 Using ControlCenter2.0 (For Windows®)
- 4 Using MFC Remote Setup (For Windows®) (not available for DCP-7020)
- 5 Using Brother PC-FAX software (For Windows®) (not available for DCP-7020)
- PC-FAX sending
- Speed-Dial setup
- Brother Address Book
- Setting up a Member in the Address Book
- Setting up a Group for Broadcasting
- Editing Member information
- Deleting a Member or Group
- Exporting the Address Book
- Importing to the Address Book
- Sending a file as a PC-FAX using the Facsimile style user interface
- Sending a file as a PC-FAX using the Simple style user interface
- Setting up PC-FAX receiving
- 6 Network Scanning (For Windows®) (MFC-7225N, MFC-7820N or models with the optional NC-2200w Only)
- 7 Using your machine with a Macintosh®
- Setting up your USB-equipped Apple® Macintosh®
- Using the Brother printer driver with your Apple® Macintosh® (Mac OS® X)
- Using the Brother printer driver with your Apple® Macintosh® (Mac OS® 9.1 to 9.2)
- Using the PS driver with your Apple® Macintosh® (MFC-7225N and MFC-7820N only)
- Sending a fax from your Macintosh® application (not available for DCP-7020)
- Scanning from a Macintosh®
- Configuring Network Scanning
- Using Presto!® PageManager®
- Using ControlCenter2.0 (For Mac OS® X 10.2.4 or greater)
- MFC Remote Setup (Mac OS® X 10.2.4 or greater) (not available for DCP-7020)
- Index
- brother USA/CAN
Using your machine with a Macintosh
®
7 - 18
7
Adjusting the Image
Brightness
Adjust the
Brightness
setting to get the best image. The Brother TWAIN Scanner driver offers 100
Brightness levels (-50 to 50). The default value is 0, representing an ‘average’ setting.
You can set the
Brightness
level by dragging the slide bar to the right to lighten the image or to the left to
darken the image. You can also type a value in the box to set the level. Click
OK
.
If the scanned image is too light, set a lower
Brightness
level and scan the image again.
If the image is too dark, set a higher
Brightness
level and
scan the image again.
Note
The
Brightness
setting is only available when
Black & White
or
Gray (Error Diffusion)
or
True Gray
is
selected.
Contrast
You can only adjust the
Contrast
level when you have selected one of the Gray Scale settings, it is not
available when you have selected Black & White as the selected
Color Type
.
Increasing the
Contrast
level (by dragging the slide bar to the right) emphasizes dark and light areas of the
image, while reducing the
Contrast
level (by dragging the slide bar to the left) reveals more detail in the gray
areas. Instead of using the slide bar, you can type a value in the box to set the Contrast. Click
OK
.